Description

Osmo Polyx-Oil Original Clear Matt 750ml

Osmo Polyx-Oil Original Clear Matt 750ml is a premium clear hardwax oil for protecting interior wooden floors, furniture, doors, joinery and other wooden surfaces with a durable, natural-looking matt finish.

Also known as Osmo 3062 Clear Matt, this original hardwax oil combines natural oils and waxes to protect wood from everyday wear while enhancing the timber’s natural grain and character. It is ideal when you want a tough, water-repellent finish without the heavy look of a traditional varnish.

The 750ml tin is a practical choice for furniture, doors, smaller floor areas, touch-ups and interior wood finishing projects where a high-quality clear matt finish is required.

Why Choose Osmo Polyx-Oil Original Clear Matt?

Osmo Polyx-Oil Original is one of the most trusted finishes for interior wood because it protects the surface while allowing the wood to retain its natural appearance. Unlike many conventional coatings, it forms a microporous finish that will not crack, peel, flake or blister.

The clear matt finish is especially popular for floors and furniture where you want a subtle, low-sheen appearance that brings out the beauty of the wood without looking overly glossy.

Key Benefits

• Original Osmo hardwax oil for interior wood
• Clear matt finish for a natural, low-sheen appearance
• Enhances the wood’s natural grain and character
• Extremely durable and hardwearing
• Suitable for wooden floors, furniture, doors and joinery
• Water-repellent, dirt-resistant and abrasion-resistant
• Resistant to common household spillages including water, juice, tea, coffee, cola, beer and wine
• Microporous finish that allows the wood to breathe
• Will not crack, peel, flake or blister
• No primer required on most suitable bare wood surfaces
• No sanding required between coats when applied correctly
• Made using natural oils and waxes
• Easy to clean, maintain and refresh
• Suitable for children’s toys once dry, according to EN 71.3

Natural Matt Protection for Interior Wood

Osmo Polyx-Oil Original Clear Matt 3062 is designed to protect wood while keeping the surface looking natural. It penetrates into the wood and creates a protective finish that resists moisture, dirt and everyday wear.

Because it is a hardwax oil rather than a traditional varnish, it leaves the wood feeling more natural to the touch. The finish is hardwearing enough for flooring but refined enough for furniture, doors, panels and detailed interior joinery.

The clear matt sheen is ideal for customers who want a modern, understated finish with minimal shine. It helps highlight the grain and tone of the timber while keeping the final appearance subtle and elegant.

Best Uses for Osmo Polyx-Oil Original Clear Matt 750ml

Use this product on interior wood where you want a durable clear matt finish that protects the surface and enhances the natural look of the timber.

• Wooden floors
• Solid wood flooring
• Engineered wood flooring
• Parquet and block-strip flooring
• Interior wooden furniture
• Tables, chairs and shelving
• Internal doors
• Wooden panels
• Interior joinery
• Cork floors
• OSB and suitable interior wood surfaces

Always test first on a small, discreet area to confirm the final colour, sheen and appearance, especially on unfamiliar timber or previously treated surfaces.

Coverage and Drying Time

• Coverage: approximately 24m² per litre with one coat
• 750ml tin coverage: approximately 18m² with one coat
• Recommended coats: two thin coats on new or freshly sanded wood
• Drying time: approximately 8–10 hours per coat under normal conditions
• Finish: clear matt
• Product code: 3062
• Use: interior wood only

Coverage can vary depending on the wood species, sanding grade, surface preparation and absorbency of the timber. Rough, open-grained or highly absorbent wood may require more product.

Application Guide

For the best finish, make sure the wood is clean, dry and frost-free before application. Remove old paints, lacquers and varnishes completely. Previously oiled surfaces should be cleaned and prepared before recoating.

Sand the surface carefully before applying. For flooring, finish sanding is usually recommended to P120–150. For furniture and finer interior woodwork, a finer sanding grade may be suitable depending on the project.

Stir thoroughly before use. Do not thin.

Apply very thinly and evenly along the wood grain using an Osmo brush, floor brush or microfibre roller. Work the product into the surface and avoid over-application. Too much oil can slow drying and may leave the surface tacky.

Allow the first coat to dry for approximately 8–10 hours with good ventilation, then apply a second thin coat. For refreshing a previously oiled surface, one thin coat is often sufficient if the wood is clean, dry and in good condition.

Clear Matt Finish vs Satin or Gloss

Clear Matt 3062 is the best choice if you want a low-sheen finish that looks natural and understated. It protects the wood while keeping shine to a minimum.

If you prefer a slightly richer sheen, you may want to compare it with Osmo Polyx-Oil Original Clear Satin 750ml. For a more natural pale look on light-coloured woods, consider Osmo Polyx-Oil Effect Raw 750ml.

Why Buy from Masseys DIY?

At Masseys DIY, we stock quality woodcare products for trade and DIY customers, including a wide range of Osmo oils for interior and exterior timber. Whether you are finishing a wooden floor, restoring furniture or protecting interior joinery, Osmo Polyx-Oil Original Clear Matt 750ml gives you professional-quality protection in a convenient tin size.

You May Also Need

Browse our full range of Osmo Oil products, view more interior varnishes and wood oils, or compare this matt finish with Osmo Polyx-Oil Original Clear Satin 750ml and Osmo Polyx-Oil Effect Raw 750ml.

FAQs

What is Osmo Polyx-Oil Original Clear Matt 750ml used for?

Osmo Polyx-Oil Original Clear Matt 750ml is used to protect interior wooden floors, furniture, doors, panels, joinery and other suitable wood surfaces with a durable clear matt hardwax oil finish.

Is Osmo Polyx-Oil Clear Matt suitable for wooden floors?

Yes. Osmo Polyx-Oil Original Clear Matt is suitable for wooden floors, including solid wood, engineered wood, parquet and block-strip flooring. It provides a hardwearing, water-repellent and dirt-resistant finish.

Does Osmo Clear Matt change the colour of wood?

As a clear oil-based finish, it can enhance and slightly deepen the natural tone and grain of the wood. Always test first to confirm the final appearance before applying to the full surface.

How much does a 750ml tin cover?

A 750ml tin covers approximately 18m² with one coat on smooth, prepared wood. Coverage can vary depending on the timber, sanding grade and absorbency of the surface.

How many coats should I apply?

Apply two thin coats on new, untreated or freshly sanded wood. For refreshing a previously oiled surface, one thin coat is often enough if the surface is clean, dry and sound.

How long does Osmo Polyx-Oil Original Clear Matt take to dry?

Drying time is approximately 8–10 hours per coat under normal conditions with good ventilation. Cold temperatures, poor ventilation, high humidity or over-application can increase drying time.

Do I need to sand between coats?

No sanding is normally required between coats when the product is applied correctly and thinly. Make sure the first coat is fully dry before applying the second coat.

Is Osmo Polyx-Oil better than varnish?

Osmo Polyx-Oil gives a more natural feel than many traditional varnishes and is easier to maintain or refresh in worn areas. It is a good choice when you want durable protection without a thick surface coating.

Can I use Osmo Polyx-Oil Clear Matt on furniture?

Yes. It is suitable for interior wooden furniture as well as floors, doors, panels and joinery. The clear matt finish is ideal for furniture where you want a natural, low-sheen appearance.