Ronseal One Coat Fence Life 5L – Unsurprisingly, you only need to use one coat of our One Coat Fence Life to colour and protect your shed or fence. Perfect if you want to get the job done quickly. You don’t have to worry about it greying either, as it’s colour will last a couple of years. Job done.
- 100% showerproof in one hour
- Keeps its colour for up to two years
- Protects your wood from greying
- Can be brushed or sprayed
- Comes in a range of natural colours
Ronseal One Coat Fence Life has a new IMPROVED formula!
Ronseal One Coat Fence Life 5L Details
- Colours and protects rough sawn wood
- 100 percent showerproof in 1 hour
- Keeps its colour for up to 2 years
- Protects your wood from greying
6 COLOURS AVAILABLE
Before you start
You can’t use this stain on decking, garden furniture or other smooth planed wood. We have other products to help you with that.
Cold wet weather stops the stain from drying and could wash it off. So make sure it’s a warm day with the temperature above 10°C and no rain is forecast.
The wood needs to be clean and dry so the stain can soak in properly. To clean the wood, use a stiff brush to get rid of any dirt.
If you want to cover up a bright, strong or contrasting colour, you’ll need to use extra coats. This stain is safe to use around plants and pets.
Application
You can either brush or spray your stain Ronseal One Coat Fence Life.
Brushing
Get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far.
After one hour, it will be 100% showerproof. It takes 4 hours to dry fully.
If your wood is weathered, you may need to apply a second coat of Ronseal One Coat Fence Life. After the first coat has dried, review it to see if you need a second one.
Spraying
Pour the liquid into the tank.
Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish.
Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.
Aftercare
Maintenance
Regularly inspect your wood for signs of damage. If you notice any, just apply another coat of the stain to protect the wood.
Cleaning
Remove as much stain off your brush as possible and then clean them in warm soapy water.
You should never pour the leftover stain down drains or watercourses. Instead, contact your local council for ways to safely dispose of it.
Technical specifications
Usage – New or previously stained rough sawn wood
Coverage- 6m2 per litre. 5L will cover up to 6 fence panels
Dry time – Rainproof in one hour, completely dry in four hours
Coat time – Four hours, if necessary
Number of coats – One
Colours – Harvest Gold, Red Cedar, Medium Oak, Dark Oak, Forest Green, Tudor Black Oak
Finish – Matt
Durability – Protects from rain and won’t grey in the sunshine so colour lasts for up to two years
Application – Brush or spray
Sizes – 5L
VOC – Low
Reviews
There are no reviews yet.