Gorilla Heavy Duty Grab Adhesive

Description

Gorilla Heavy Duty Grab Adhesive is so versatile, it grabs virtually anything instantly. The flexible, gap filling formula provides a long-lasting, heavy duty bond.

This is a grab adhesive that’s 100% waterproof and withstands extreme temperatures, meaning you can use it indoors or out, even underwater, for an extra-tough bond that’ll last.

• Ultra-High Strength
• Holds Instantly
• Gap Filling
• Withstands Extreme Temperatures
• Even Bonds Underwater

---

Find at the start of aisle 20 at Masseys in Swadlincote.

---

Easy to Use
Flexible, fast grab formula which bonds virtually anything.

 

Ultra-High Strength
Provides a long-lasting heavy duty bond

 

Indoor / Outdoor
100% waterproof formula which withstands extreme heat and cold.

 

Gap Filling
Fills voids with little or no shrinkage.

---

How to use…

Gorilla Heavy Duty Grab Adhesive PREPARATION
All surfaces must be clean.

1. LOAD
Cut off the tip of the cartridge above the screw thread. Screw on nozzle and cut the desired bead size. Insert into cartridge gun.

2. APPLY
Squeeze adhesive on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.

3. PRESS
Within 5 minutes, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening.

Gorilla Heavy Duty Grab Adhesive full cure achieved in 24 hours.